2010 Cadillac Truck SRX AWD V6-3.0L Page 1679

2010 Cadillac Truck SRX AWD V6-3.0L Page 1679

* The engine speed is greater than 400 RPM for 2 s.

* The transmission is not in emergency mode.

* Driving in D range.

* Driving time is more than 10 min.

* TCM communication is normal.

Conditions for Setting the DTC

P0711

The automatic transmission fluid temperature is less than 20掳C (36掳F) after 10 min driving or more.

P0712

The automatic transmission fluid temperature is more than 200掳C (473掳F) for 10 s or more after consecutive 30 times.

P0713

The automatic transmission fluid temperature is lower than -43掳C (-45掳F) for 1 s or more after consecutive 12 times.

Action Taken When the DTC Sets

* The TCM will default the transmission oil temperature to 80掳C (353掳F).

* No lock-up slip control

* No neutral control

* No self learning control

Conditions for Clearing the DTC

P0711, P0712, and P0713

These are Type C DTCs.

P0712, P0713

The automatic transmission fluid temperature is between 20-150掳C (68-302掳F) for 10 s or more.

Diagnostic Aids

A correct transmission fluid level is required for a proper function. The automatic transmission fluid temperature sensor is located inside the

transmission at the valve body. To ensure that the shown oil temperature is correct, measure the oil temperature with an external thermometer.

Reference Information

Schematic Reference

Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams/Electrical

Diagrams)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

Description and Operation

Transmission Component and System Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and

Operation/AF40-6 - Automatic Transmission/Transmission Component and System Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)