Sunday, April 11, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 436

2010 Cadillac Truck SRX FWD V6-3.0L Page 436



Display Actuator Replacement)



* Video Display Replacement (See: Accessories and Optional Equipment/Entertainment Systems/Television / Monitor/Service and Repair)



* Control Module References (See: Testing and Inspection/Programming and Relearning)for radio and amplifier replacement, programming,



and setup



B1271



DTC B1271



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC B1271 00



- Theft Protection Active



Circuit/System Description



When the radio is initially installed in the vehicle, the radio receives VIN information via serial data. The radio stores a portion of the VIN and



compares this sequence to the VIN information received each time the radio powers on. The VIN in the radio is a single one-time learn.



The radio theft deterrent system is intended to disable or limit radio functionality if incorrect vehicle information is received by the radio. The radio



disables functionality if the VIN information received by the radio does not match the VIN information that has been learned by the radio. This



DTC is generated by the module when the Theft Protection is activated.



Conditions for Running the DTC



This DTC test runs when the radio changes from OFF to ON.



Conditions for Setting the DTC



The radio has learned a correct VIN sequence and the VIN information received via serial data does NOT match the learned VIN sequence.



Action Taken When the DTC Sets



The radio may be disabled or have limited functionality. The radio display will indicate that theft protection is active.



Conditions for Clearing the DTC



The radio receives the correct VIN information via serial data.



Diagnostic Aids



A possible cause of incorrect VIN info could be the radio was originally installed in another vehicle.



Reference Information



Schematic Reference



Radio/Navigation System Schematics (See: Accessories and Optional Equipment/Diagrams/Electrical Diagrams/Radio/Navigation System



Schematics)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Radio/Audio System Description and Operation (See: Accessories and Optional Equipment/Description and Operation/Radio/Audio System)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)

No comments:

Post a Comment