2010 Cadillac Truck SRX FWD V6-3.0L Page 431
Control Module References (See: Testing and Inspection/Programming and Relearning) for radio/HVAC control replacement, setup, and
programming
B1023
DTC B1023
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC B1023 00
- Integral Switch Malfunction
Circuit/System Description
The vehicle theft deterrent subsystem provides the capability to lock or unlock the steering electrically. The steering column lock control module is
allowed to unlock when power mode transitions to a non off power mode and an authenticated driver identification device is present. Once the
column is unlocked, a crank request can be allowed.
Conditions for Running the DTC
* The ignition is in OFF, ACCESSORY or RUN position.
* The system voltage is between 9-16 V.
Conditions for Setting the DTC
The steering column lock control module detects an internal sensor malfunction resulting in lock status of invalid to be transmitted on serial data.
Action Taken When the DTC Sets
* DTC B1023 is stored in memory.
* The driver information center displays the service column lock system warning message.
* The steering column lock indicator is ON.
Conditions for Clearing the DTC
* No steering column lock control module internal sensor malfunction so lock status of valid is transmitted on serial data.
* The condition for setting the DTC is no longer present.
Reference Information
Schematic Reference
Column Lock Schematics (See: Diagrams/Electrical Diagrams/Steering/Steering Column)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)
Description and Operation
Steering Wheel and Column Description and Operation (See: Steering and Suspension/Steering/Steering Column/Description and Operation)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Comments
Post a Comment