2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 2570

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 2570

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Control solenoid valve assembly replacement. Refer to Control Module References (See: Testing and Inspection/Programming and

Relearning) for replacement, setup, and programming.

* Perform the Service Fast Learn Adapts (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and

Inspection/Programming and Relearning) following all transmission related repairs.

6L50/6L80/6L90 - Automatic Transmission

DTC P2728-P2730

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P2728

- Clutch Pressure Control (PC) Solenoid 5 System Performance

DTC P2729

- Clutch Pressure Control (PC) Solenoid 5 Control Circuit Low Voltage

DTC P2730

- Clutch Pressure Control (PC) Solenoid 5 Control Circuit High Voltage

Diagnostic Fault Information

Typical Scan Tool Data