2010 Cadillac Truck SRX AWD V6-3.0L Page 598

2010 Cadillac Truck SRX AWD V6-3.0L Page 598

* Accessory Switch Replacement (See: Instrument Panel, Gauges and Warning Indicators/Service and Repair)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for BCM replacement, programming and setup

B2750

DTC B2750

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions)provides an overview of each diagnostic category.

DTC Descriptors

DTC B2750 01

- Horn Relay Secondary Circuit Short to Battery

DTC B2750 02

- Horn Relay Secondary Circuit Short to Ground

DTC B2750 04

- Horn Relay Secondary Circuit Open

Diagnostic Fault Information

Circuit/System Description

The body control module (BCM) provides a ground for the Horn PCB relay within the underhood fuse block. The underhood fuse block will then

provide B+ voltage to the horn control circuit, sounding the horn.

Conditions for Running the DTC

When the horn output is actively being requested by the BCM.

Conditions for Setting the DTC

B2750 01

The BCM detects a short to voltage in the horn relay control circuit.

B2750 02

The BCM detects a short to ground in the horn relay control circuit.

B2750 04

The BCM detects an open/high resistance in the horn relay control circuit.

Action Taken When the DTC Sets

B2750 01, B2750 04

The horn will be inoperative.