Thursday, September 24, 2020

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1716

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1716



electrical connector.



5. Ignition ON, verify with a scan tool the following test status parameters display OK:



* Pressure Control Solenoid Valve 3 Performance Test Status



* Pressure Control Solenoid Valve 3 Control Circuit High Voltage Test Status



* Pressure Control Solenoid Valve 3 Control Circuit Low Voltage Test Status



瀚慖f any test status parameter displays Fault or Malfunction, replace the Q8 control solenoid valve assembly.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



* Control Solenoid Valve and Transmission Control Module Assembly Cleaning (See: Transmission and Drivetrain/Automatic



Transmission/Transaxle/Testing and Inspection/Component Tests and General Diagnostics/Control Solenoid Valve and Transmission Control



Module Assembly Cleaning)



* Perform the Service Fast Learn Adapts (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and



Inspection/Programming and Relearning/Service Fast Learn Adapts) following all transmission related repairs.



* Replace the Q8, K71 control solenoid valve assembly. Refer to Control Module References (See: Testing and Inspection/Programming and



Relearning) for replacement, setup, and programming.



P0970



DTC P0969-P0971



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P0969



- Clutch Pressure Control (PC) Solenoid 3 System Performance



DTC P0970



- Clutch Pressure Control (PC) Solenoid 3 Control Circuit Low Voltage



DTC P0971



- Clutch Pressure Control (PC) Solenoid 3 Control Circuit High Voltage



Diagnostic Fault Information



Typical Scan Tool Data



Circuit/System Description



The clutch pressure (PC) solenoid 3 is part of the control solenoid valve assembly which has no serviceable parts. The normally high clutch PC



solenoid 3 regulates and directs the clutch PC solenoid 3 oil pressure to the 4-5-6 clutch regulator valve and 4-5-6 clutch boost valve. Increasing

No comments:

Post a Comment