2000 Porsche Boxster (986) F6-2.7L Page 86
Parts Information
Tools:
Work Procedure:
Prepping the vehicle.
1.0. Remove the driver side seat.
1.1 Move the convertible top to the service position and disengage both tension cables.
1.2 Remove the storage compartment, carpet., and engine compartment cover.
1.3 Disconnect and cover the negative battery terminal.
1.4 Remove the fuse board 1 and relay carrier.
1.5 Remove the driver-side doorsill by detaching the sill cover and disengaging the carpet.
1.6 Remove the left rear side panel lining.
1.7 Partially detach the water collection tray below the convertible top compartment lid on the driver's side.
1.8 Remove the rear spoiler.
1.9 Remove the rear bumper cover and bumper bar.
1.10 Remove the exhaust muffler.
1.11 Remove the throttle body distribution pipe and tuning pipe. Follow procedure below.
Tools:
Work Procedure:
Prepping the vehicle.
1.0. Remove the driver side seat.
1.1 Move the convertible top to the service position and disengage both tension cables.
1.2 Remove the storage compartment, carpet., and engine compartment cover.
1.3 Disconnect and cover the negative battery terminal.
1.4 Remove the fuse board 1 and relay carrier.
1.5 Remove the driver-side doorsill by detaching the sill cover and disengaging the carpet.
1.6 Remove the left rear side panel lining.
1.7 Partially detach the water collection tray below the convertible top compartment lid on the driver's side.
1.8 Remove the rear spoiler.
1.9 Remove the rear bumper cover and bumper bar.
1.10 Remove the exhaust muffler.
1.11 Remove the throttle body distribution pipe and tuning pipe. Follow procedure below.
Comments
Post a Comment