2000 Porsche Boxster (986) F6-2.7L Page 201

Parts Information:

Work Procedure:

Installing the double-sided tape from the seat cover to the seat cushion.

1. Remove the front seat.

2. Remove the seat cover.

Note:

Disengage the seat cover and roll it back until the adhesive film can be affixed between the cushion cut-outs (slits) in figures 1 and 2.

3. Remove one side of the protective film on the double face tape.

4. Affix the adhesive film on the seat cushion in the center between the two cushion cutouts (figure 2).

5. Remove the other side of the protective film on the double4aced tape.

6. Affix the seat cover on the double4aced tape (figure 3). To do so, pull the seat cover by the strip (pull the cover taut). Starting in the middle,