2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1153
Circuit/System Description
The primary source of heat in the transmission is the torque converter. Hot oil exits the torque converter through the torque converter clutch (TCC)
control valve and flows to the transmission cooler supply line. The supply line connects to the cooler, which is in the radiator. From the cooler, the
oil returns through the oil cooler return line and enters the lubrication circuits. After lubricating the internal components, the oil returns to the oil
pan. The transmission fluid temperature sensor is located in the control solenoid valve assembly.
Conditions for Running the DTC
* The ignition voltage is between 10.2-15.5 V.
* The engine speed is greater than 400 RPM for 2 s.
* The transmission is not in emergency mode.
* Transmission control module (TCM) communication is normal.
Conditions for Setting the DTC
* Vehicle speed less than 180 km/h (112 MPH) and transmission fluid temperature more than 150掳C (302掳F) for more than 10 s.
* Vehicle speed more than 180 km/h (112 MPH) and transmission fluid temperature more than 150掳C (302掳F) for more than 60 s.
No comments:
Post a Comment