Friday, November 22, 2019

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1575

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1575



* The transmission is not in emergency mode.



* The engine speed is greater than 400 RPM for 10 min.



* Vehicle speed was 40 km/h (25 MPH) or greater at once.



P0712



* The ignition voltage is 10.2-15.5 V.



* The engine speed is greater than 400 RPM for 2 s.



* The transmission is not in emergency mode.



* Driving in D range.



* TCM communication is normal.



P0713



* The ignition voltage is 10.2-15.5 V.



* The engine speed is greater than 400 RPM for 2 s.



* The transmission is not in emergency mode.



* Driving in D range.



* Driving time is more than 10 min.



* TCM communication is normal.



Conditions for Setting the DTC



P0711



The automatic transmission fluid temperature is less than 20掳C (36掳F) after 10 min driving or more.



P0712



The automatic transmission fluid temperature is more than 200掳C (473掳F) for 10 s or more after consecutive 30 times.



P0713



The automatic transmission fluid temperature is lower than -43掳C (-45掳F) for 1 s or more after consecutive 12 times.



Action Taken When the DTC Sets



* The TCM will default the transmission oil temperature to 80掳C (353掳F).



* No lock-up slip control



* No neutral control



* No self learning control



Conditions for Clearing the DTC



P0711, P0712, and P0713



These are Type C DTCs.



P0712, P0713



The automatic transmission fluid temperature is between 20-150掳C (68-302掳F) for 10 s or more.



Diagnostic Aids



A correct transmission fluid level is required for a proper function. The automatic transmission fluid temperature sensor is located inside the



transmission at the valve body. To ensure that the shown oil temperature is correct, measure the oil temperature with an external thermometer.



Reference Information



Schematic Reference



Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams/Electrical



Diagrams)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Transmission Component and System Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/AF40-6 - Automatic Transmission/Transmission Component and System Description)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

No comments:

Post a Comment