Monday, November 4, 2019

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Technical Service Bulletin # 07-08-44-001G Date: 110609

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Technical Service Bulletin # 07-08-44-001G Date: 110609

Audio System - Difficult To Install Fixed Radio Antenna

INFORMATION

Bulletin No.: 07-08-44-001G

Date: June 09, 2011

Subject: Information on Difficult to Install Fixed Radio Antenna Mast

Models:

2006-2012 Cadillac Escalade EXT

2005-2010 Chevrolet Cobalt

2006-2009 Chevrolet TrailBlazer Models

2006-2012 Chevrolet Avalanche, Colorado, Silverado (Classic and New Style)

2006-2009 GMC Envoy

2006-2012 GMC Canyon, Sierra (Classic and New Style)

2006-2010 Pontiac G5

2006-2009 Saab 9-7X

..........................................................................................................................................................................................................................................

Supercede:

This bulletin is being revised to add the 2012 model year. Please discard Corporate Bulletin Number 07-08-44-001F (Section 08 - Body and

Accessories).

..........................................................................................................................................................................................................................................

- A design change was made to the antenna base and antenna mast starting in October 2005. The radio antenna base size increased from 6 mm

(0.23 in) to 7 mm (0.27 in) for improved stability and radio reception.

- There are two different design antenna masts available. The antenna masts can be distinguished by the outer bottom of the antenna mast. The

first design antenna mast (1) will have a six-sided hex design and a 6 mm (0.23 in) inside diameter thread. The second design antenna mast

(2) will have two flats on the outer mast and a 7 mm (0.27 in) inside diameter thread.

- The second design antenna mast will have more resistance when installing due to the interference fit of the threads in the mast as identified

by the arrows in the graphic.

Note

Before proceeding, verify that the mast and base stud are properly aligned.

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 150

- A wrench will be needed to install the antenna mast. When starting to thread the antenna mast onto the base stud, interference will be felt.

The interference is similar to the feeling of a cross threaded fastener.

Important

Use a protective tape or a cloth inside an adjustable wrench when installing the antenna mast. This will help prevent damage to the

painted coating on the antenna mast.

- Tighten the antenna mast.

Tighten

Tighten to 6 Nm (53 lb in).

No comments:

Post a Comment