2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 725
Circuit/System Description
The driver door switch (DDS) and passenger door switch (PDS) control the power window functions through the power window motor up and
down control circuits. The door switches monitor the control circuits for fault conditions when up or down operation is requested prior to activating
the function and during operation.
Conditions for Running the DTC
* Battery voltage must be between 9-16 volts.
* The ignition is ON.
Conditions for Setting the DTC
B3205 00
The DDS or PDS detects a short to ground or short to voltage on their respective window motor control circuit.
B3205 0B
The DDS or PDS has detected excessive current flow on their respective window motor control circuit.
Action Taken When the DTC Sets
The affected power window will be inoperative.
Conditions for Clearing the DTC
* The DTC will be current for as long as the fault is present.
* When the fault is no longer present, the DTC will be a history DTC.
* A history DTC will clear after 50 ignition cycles.
Diagnostic Aids
B3205 0B can be set due to excessive physical resistance in the window regulator assembly. Ensure proper mechanical operation of the regulator
assembly prior to replacing electrical components.
No comments:
Post a Comment