2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 1015
Circuit/System Description
The trailer brake control relay receives inputs from the fuel pump/trailer brake control module, these inputs are used to determine the amount of
voltage the relay will supply to the trailer brakes.
Conditions for Running the DTC
* Ignition ON.
* Battery voltage is 9.5-17 V.
* The module is powered up and completes initialization.
Conditions for Setting the DTC
C0870 00
The trailer brake circuit reference voltage for the trailer brake control relay is below 4.8 V or above 5.2 V.
C1112 00
* The fuel pump/trailer brake control module detects a short to ground, open or a short to voltage on the integrated trailer brake relay control
active low circuit.
* The fuel pump/trailer brake control module detects an open in the battery positive voltage circuit to the trailer brake control relay.
* The fuel pump/trailer brake control module detects an open in the ground circuit to the trailer brake control relay.
* The fuel pump/trailer brake control module detects a short to ground or open in the solid state relay enable circuit.
C1113 01
* The fuel pump/trailer brake control module detects a short to voltage in the solid state relay enable circuit.
* The fuel pump/trailer brake control module detects a short to voltage in the trailer brake output supply voltage control circuit.
C1114 00
The fuel pump/trailer brake control module detects a short to ground, open or a short to voltage on the solid state relay output circuit.
C1119 00
The fuel pump/trailer brake control module detects a short to ground, open or a short to voltage on the relay feedback circuit.
Action Taken When the DTC Sets
* The trailer brake control will be disabled for the remainder of the ignition cycle.
* The driver information center will display Service Trailer Brake System.
Condition for Clearing the DTC
* The condition for the DTC is no longer present.
* The fuel pump/trailer brake control module clears the history DTC when a current DTC is not detected in 40 consecutive drive cycles.
Reference Information
Schematic Reference
Trailer Brake Control Schematics (See: Brakes and Traction Control/Diagrams/Electrical Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Trailer Brake Controls Description and Operation (See: Powertrain Management/Computers and Control Systems/Description and
Operation/Trailer Brake Controls Description and Operation)
No comments:
Post a Comment