2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 985

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 985

5. Turn OFF the ignition for 60 seconds.

6. Turn ON the ignition.

7. If the repair was related to a DTC, duplicate the Conditions for Running the DTC and use the Freeze Frame/Failure Records, if applicable, in

order to verify the DTC does not reset. If the DTC resets or another DTC is present, refer to the Diagnostic Trouble Code (DTC) List -

Vehicle (See: Diagnostic Trouble Code Descriptions/Diagnostic Trouble Code (DTC) List - Vehicle) and perform the appropriate diagnostic

procedure.

C0625

DTC C0615, C0620, C0625, or C0630

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC C0615 08

- Left Front Position Sensor Circuit - Signal Invalid

DTC C0615 55

- Left Front Position Sensor Circuit - Expected Number Of Transitions Not Reached

DTC C0620 08

- Right Front Position Sensor Circuit - Signal Invalid

DTC C0620 55

- Right Front Position Sensor Circuit - Expected Number Of Transitions Not Reached

DTC C0625 08

- Left Rear Position Sensor Circuit - Signal Invalid

DTC C0625 55

- Left Rear Position Sensor Circuit - Expected Number Of Transitions Not Reached

DTC C0630 08

- Right Rear Position Sensor Circuit - Signal Invalid

DTC C0630 55

- Right Rear Position Sensor Circuit - Expected Number Of Transitions Not Reached

Diagnostic Fault Information