2010 Cadillac Truck Escalade EXT AWD V8-6.2L Technical Service Bulletin # 07-08-47-004D Date: 110817

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Technical Service Bulletin # 07-08-47-004D Date: 110817

Body Controls - Body Control Module (BCM) Grounds

INFORMATION

Bulletin No.: 07-08-47-004D

Date: August 17, 2011

Subject: Information on Body Control Module (BCM) Grounds

Models:

2006-2011 Buick Lucerne

2007-2012 Buick Enclave

2006-2011 Cadillac DTS

2007-2009 Cadillac SRX

2007-2012 Cadillac Escalade Models

2008-2012 Cadillac CTS

2006-2008 Chevrolet Monte Carlo

2006-2012 Chevrolet Impala

2007-2009 Chevrolet Equinox

2007-2012 Chevrolet Avalanche, Silverado, Suburban, Tahoe

2008-2012 Chevrolet Express, Traverse

2007-2012 GMC Acadia, Sierra, Yukon Models

2008-2012 GMC Savana

2007-2009 Pontiac Torrent

2007-2010 Saturn OUTLOOK

2008-2010 Saturn VUE

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 136

2008-2010 HUMMER H2

Supercede:

This bulletin is being revised to update the models and model years. Please discard Corporate Bulletin Number 07-08-47-004C (Section 08 - Body

and Accessories).

The purpose of this bulletin is to inform dealers of an issue that could cause internal module damage to the Body Control Module (BCM).

The BCM may be damaged when the module is supplied with battery power and the ground path is removed. You must remove the negative battery

cable first before removing a BCM ground.

Issue 1

Below is a list of vehicles and the components that the BCM ground path passes through. The negative battery cable must be removed when

removing the components noted below.

- 2007 Cadillac Escalade (Left instrument panel junction block)

- 2007 Chevrolet Avalanche, Silverado, Suburban (Left instrument panel junction block)

- 2007 GMC Sierra, Yukon (Left instrument panel junction block)

- 2008-2010 HUMMER H2 (Instrument panel electrical center)

- 2008-2010 Saturn VUE (I/P splice pack)

Issue 2

It is important to note when removing a ring terminal ground, splice pack connector, or inline harness connector for all the vehicles listed in the

model section above, that it doesn't include a BCM ground path. You must remove the negative battery cable if you determine that it is a BCM

ground path.

As an example: If the BCM grounds become disconnected, internal damage to the BCM will occur. Other systems controlled by the BCM will also

be affected, such as an inoperative or intermittent condition in one or more of the following systems:

- Interior lighting will remain on or will not work

- Exterior lighting will remain on or will not work

- Remote keyless entry

- Door locks

- Power windows and mirrors

- Remote vehicle start

- Remote trunk release