Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S501-08 Date: 020501
2000 Jaguar S-Type (X200) V6-3.0L Page 81
Interior - Front Seat Squab Covers Fasteners Broken
S501-08
S-TYPE
DATE 05/01
MODEL
2000 MY-ON
S-TYPE
VIN
L00001-ON
Broken Fasteners - Front Seat Squab Covers - Replace Broken Fasteners
Issue:
This Technical Bulletin provides additional information about removing/installing the front seat back covers on S-TYPE vehicles.
In some cases when removing/installing the front seat back covers, the fixings are broken and are not always replaced.
Action:
When removing/installing the front seat back covers (refer to JTIS CD ROM, section 501-10, SRO 76.70.15), use great care not to break any of the
mountings. To prevent the mountings being broken during the removal, carefully pry the fixings apart using a suitable flat blade trim tool, while fully
supporting the weight of the seat back cover. If any of the mountings are broken, replace them. If a mounting/retention point on the seat back cover
is broken, replace the complete seat back cover.
Refer to JTIS CD ROM, section 501-10, SRO 76.70.15 for mounting/retention points.
Parts Information
Warranty Information:
This Technical Bulletin is for information only
No comments:
Post a Comment