2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2C40 - P0151 (DME)
2C40 - P0151
Information saved in
DME
Fault code
2C40 - P0151
Fault text
DME, internal fault: oxygen sensor 2, evaluation module
Fault description
O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1)
Condition for fault identification
Test condition:
Monitoring of O2 sensor chip No fault memories
Terminal condition: Terminal 15, engine on Voltage condition:
none
Condition for fault memory entry
Short to ground in self-diagnosis processor chip
Action in service
Visual inspection of wires, DME plug and O2 sensor for damage
Check wires
Check plug-in connections DME <=> Wiring harness
<=> Upstream (pre-cat) O2 sensor for Bank 2
Check wiring harness for shorts to positive or ground and shorts/shunt to other bank (melted?) => Replace wiring harness
Replace O2 sensor
Replace DME
Fault effect and breakdown warning
Driver information Warning light: MIL ON
No comments:
Post a Comment