Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB00246 Date: 091117

Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB00246 Date: 091117

Body - Liftgate 'HSE' Emblem Missing

No: LTB00246

Issue: 1

Date: 17 NOV 2009

SECTION: 501

'HSE' Tailgate Badge Not Installed

AFFECTED VEHICLE RANGE:

LR4 (LA) HSE models only VIN: AA513326 - AA518891 (see list of VINs not affected)

Model Year: 2010

CONDITION SUMMARY:

Situation:

On HSE models only, the 'HSE' tailgate badge may have not been installed during manufacturing.

Action:

In the event of a missing HSE tailgate badge, refer to the Repair Procedure outlined below to install a new badge.

PARTS:

DAM500520LQV......HSE badge Qty: 1

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools

WARRANTY:

NOTE:

Warranty claims should be submitted as a shortage claim. Repair procedures are under constant review, and therefore times are subject to change;

2010 Land Rover LR4 (LA) V6-4.0L Page 109

those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

INSTALL HSE BADGE

1. Ensure vehicle is at room temperature.

2. Clean the lower-right corner of the upper tailgate.

3. Remove new badge backing.

4. Beginning at the bottom of the 'E' of the badge, locate the new badge as indicated. (Figure 1).

5. Roll the new badge into place with a roller.

6. Remove top carrier from the badge.

List of VINs Not Affected