2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2E8E
2E8E - P150B
Information saved in
DME
Fault code
2E8E - P150B
Fault text
Intelligent battery sensor, communication
Fault description
Battery Sensor BSD (Bit Serial Data Interface) Communication Circuit
Condition for fault identification
Test condition:
IBS communications monitor Terminal condition: Terminal 15 ON
Voltage condition:
Terminal 87 >10.0 V
Condition for fault memory entry
10 sec.
Action in service
Determine whether battery sensor is installed. If not, use SGBD to delete all adaptation data and then switch ignition off/on.
Check continuity in wire connecting DME to battery sensor (BSD_BUS)
Ensure correct fit of battery sensor on battery ground terminal and check seating of all plugs
Replace battery sensor.
Fault effect and breakdown warning
Driver information
Warning light:
No warning message. The alternator responds to loss of the BSD_BUS signal by charging at a constant 14.4 V battery.
No comments:
Post a Comment