Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.
Normality Judgment
Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.
Time Needed for Diagnosis: 12288 ms
P0500
DTC P0500 VEHICLE SPEED SENSOR "A"
1. OUTLINE OF DIAGNOSIS
Judge as NG when outside of the judgment value.
Judge NG when the received data from ABSCM&H/U is abnormal vehicle speed, and the vehicle speed data is impossible.
2. COMPONENT DESCRIPTION
Vehicle speed signals are taken in to the ABS control module and hydraulic control unit, and normal/erroneous data of the ABS wheel speed
sensor is received by CAN communication from the ABS control module and hydraulic control unit.
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Always perform diagnosis more than 2000 ms after starting the engine.
5. DIAGNOSTIC METHOD
Abnormality Judgment
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 2500 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Normality Judgment
Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.
Time Needed for Diagnosis: 2500 ms
P0506
DTC P0506 IDLE AIR CONTROL SYSTEM RPM LOWER THAN EXPECTED
No comments:
Post a Comment