Sunday, July 28, 2019

2019 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)Technical Service Bulletin # LI40-10_N-048693 Date: 100126

2019 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)Technical Service Bulletin # LI40-10_N-048693 Date: 100126



Wheels/Tires - Steering Wheel Vibrations Between 70-80MPH



Steering wheel vibrations in vehicle speed range between 70-80MPH



Topic number LI40.10-N-048693



Version 1



Design group 40.10 Wheels, tires



Date 01-26-2010



Validity Model 906



Reason for change



Reason for block



Complaint:



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 90



Steering wheel vibrations in specified vehicle speed range. Vehicle vibrations can also be felt.



Cause:



Radial force variations and/or imbalance in the front wheels are transferred to the steering wheel/vehicle in the form of vibrations.



Note:



Tires not recommended by Mercedes-Benz can aggravate this problem.



Remedy:



The complaint must be reproduced by means of a test drive.



If it is not possible to reproduce the complaint, contact the customer. Otherwise, process the following points one after



the other.



1) Check wheels for damage and tire inflation pressure. Replace any damaged, unusable wheels. Correct the tire inflation pressure. Perform a test



drive if the deviations are greater than 0.5 bar.



2) Check radial force variation (RFV) of the front wheels on a suitable balance machine. Match mount the wheels/tires if necessary.



3) Balance wheels on wheel balancing machine.



4) Mount the wheels. Ensure that they are seated centrally and tighten the wheel studs/wheel nuts finger-tight in a crosswise pattern, then tighten



to the required tightening torque.



5) Perform test drive. If the problem is still present, continue with step 6).



6) Install the specified steering shaft and perform a test drive.



7) Check whether the specified steering gear is installed, replace if necessary.



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 91



NOTE:



If replacing steering gear A9064600400 with A9064600800, you must also install new high-pressure hoses.



Refer to EPC for applicable part number as of chassis S245835.



8) Perform test drive. If the complaint is still present, contact the TAC.

No comments:

Post a Comment