Tuesday, July 23, 2019

2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB00121 Date: 080229

2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB00121 Date: 080229



A/T - Revised Valve Body Removal/Installation Procedure



No.: LTB00121



Issue: 1



Date: 29 FEB 2008



SECTION: 307



Revised Workshop Procedure - Remove / Install Automatic Transmission Valve Body Assembly



AFFECTED VEHICLE RANGE



CONDITION SUMMARY:



Situation:



A revised workshop procedure has been developed for the removal and installation of the automatic transmission valve body assembly. The revised



procedure removes the oil pan and valve body together, eliminating the removal of the engine mounts and engine lifting.



Action:



When removing / installing the automatic transmission valve body, refer to the Repair Procedure outlined below.



PARTS:



No parts required.



WARRANTY:



NOTE:



Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.



Always refer to DDW to obtain the latest repair time.



DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.



REPAIR PROCEDURE



REMOVING / INSTALLING THE AUTOMATIC TRANSMISSION VALVE BODY ASSEMBLY



2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 238



NOTE:



Global Technical Reference (GTR) lookup sequence is as follows:



GTR Home> NAS >Model > Service Information> Model Year> Workshop Manuals> 3: Powertrain > 307: Automatic



Transmission/Transaxle



1. Refer to Workshop Manual (GTR) Section 307-01A or 307-01B Automatic Transmission/Transaxle (44.40.01) for the revised removal /



installation procedure.

No comments:

Post a Comment