2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # TECLTB00243 Date: 091116
Cooling System - 'Check Coolant Level' Message Displayed
No: LTB00243
Issue: 1
Date: 16 NOV 2009
SECTION: 303
'Check Coolant Level' Message Displayed
2010 Land Rover LR4 (LA) V8-5.0L Page 118
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The 'Check Coolant Level' message may be displayed in the instrument cluster message center despite there being no coolant leaks evident and the
coolant level is at the correct level. This may be caused by excessive vertical travel of the float inside the coolant expansion tank.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to install a new, updated coolant expansion tank.
PARTS:
LR020367 ................Coolant Expansion Tank Qty: 1
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
REPLACE COOLANT EXPANSION TANK
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Model > Service Information > 2010 > Workshop Manual
1. Refer to Workshop Manual (GTR) section 303-03 and replace the coolant expansion tank.
No comments:
Post a Comment