Saturday, June 29, 2019

Disclaimer2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # TECLTB00530 Date: 130308

Disclaimer2010 Land Rover LR4 (LA) V8-5.0L Technical Service Bulletin # TECLTB00530 Date: 130308



Interior - Creak Noise From Front Seat Base



LTB00530NAS1



08 MAR 2013



SECTION: 501-10



Creak Noise From Front Seat Base



2010 Land Rover LR4 (LA) V8-5.0L Page 188



AFFECTED VEHICLE RANGE:



MARKETS:



NAS



CONDITION SUMMARY:



Situation: A 'creak' noise may be heard when sitting on the seat cushion.



Cause: This may be caused by insufficient lubrication at the seat pivot point.



Action: In the event of a customer concern of the above, refer to the Repair Procedure outlined below.



PARTS:



TOOLS:



Refer to Workshop Manual for any required special tools.



WARRANTY:



REPAIR PROCEDURE:



1. NOTE:



Make sure the customer concern is a creak noise; if it is a seat rock concern, refer to Technical Bulletin LTB00176NAS.



Remove the affected seat lower cushion (TOPIx Workshop Manual section 501-10).



2010 Land Rover LR4 (LA) V8-5.0L Page 189



2. Lubricate the seat pivot point as shown using Nyogel 744L from the Squeaks & Rattles Kit.



3. Install the seat lower cushion (TOPIx Workshop Manual section 501-10).

No comments:

Post a Comment