Thursday, June 20, 2019

Disclaimer 2010 Land Rover Range Rover (LM) V8-5.0L Technical Service Bulletin # Q140 Date: 111014

Disclaimer 2010 Land Rover Range Rover (LM) V8-5.0L Technical Service Bulletin # Q140 Date: 111014



Campaign - Rear View Camera 'Blue' Screen



Q140NAS1



14 OCT 2011



*THIS SERVICE ACTION IS VALID FOR A LIMITED TIME ONLY



AND WILL EXPIRE ON 31 OCTOBER 2013*



SECTION: 418



Service Action: Rear View Camera 'Blue' Screen



AFFECTED VEHICLE RANGE:



Range Rover (LM)



VIN: AA302865 - BA336802 (specific vehicles only)



Model Year: 2010 - 2011



CONDITION SUMMARY:



Situation:



A potential concern has been identified on a limited number of vehicles fitted with the Surround Camera System which may experience signal loss



within the camera cables, resulting in a blue screen being displayed.



2010 Land Rover Range Rover (LM) V8-5.0L Page 54



Action:



Retailers are required to HOLD all affected vehicles in the above VIN range that are in their control and refrain from releasing the vehicles for new



or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Affected vehicles already in the hands of customers



should be updated at the next available opportunity. At the time of customer appointment, ensure that all outstanding service campaigns for each



individual vehicle are identified and allocate sufficient time and resources to complete all campaigns.



PARTS:



LR031215 Parking aid camera signal filter Qty: 1



TOOLS:



Refer to Workshop Manual for any required special tools



WARRANTY:



NOTE:



Always check DDW to verify that the vehicle is affected by this Service Action or any other campaign prior to undertaking any repair as



some vehicles may have been repaired in port. DDW reflects only those vehicles affected and un-repaired.



NOTE:



Repair procedures are under constant review and therefore times and prices are subject to change; those quoted here must be taken as



guidance only. Always refer to DDW to obtain the latest repair time.



Warranty claims should be submitted quoting the Program Code Q140 together with the relevant Option Code; this will result in payment of the



stated time. The option that allows for drive in / drive out may only be claimed if the vehicle is brought back into the workshop for this action



alone to be undertaken.



This Service Action is valid for a limited time only and will expire on 31 October 2013. All Warranty claims up to this date must be submitted for



payment within 30 days of completion of the repair.



Normal Warranty policies and procedures apply.



REPAIR PROCEDURE



INSTALL A PARKING AID CAMERA SIGNAL FILTER



1. Refer to Workshop Manual, section 418-02: wiring Harnesses, and install a Parking aid camera signal filter.

No comments:

Post a Comment