2020 Mercedes Benz Truck ML 350 Technical Service Bulletin # LI58-40_P-049125 Date: 100305
Computers/Controls - DAS/XD Add-On 2010-01-25-1354
DAS/XD add-on 2010-01-25-1354 for passenger cars
Topic number LI58.40-P-049125
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 03-05-2010
Validity DVD version 01/2010
Reason for change
Reason for block
Complaint:
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 311
HU_204
Model series: 204, 212
Driver check of test adapter fails.
COMAND
Model series: 221, 216
Programming/coding is not possible when the COMAND unit (with navigation) is in the as-delivered state.
Media interface
Model series: 216, 221
Programming of media interface inoperative.
IBGAS
Model series: 211
Programming of the IBGAS interface box is not possible
Rear SAM
Model series: 204, 212, 207, 197
Fault codes of the rear SAM are not displayed in the quick test. The display of fault codes in the fault code screen of the control unit is not affected.
Front signal acquisition and actuation module
Model series: 204
Control unit programming for hardware object number 2049011701 reports: "No newer control unit software found".
IC
Model series: 164, 251
The control unit programming reports for various hardware object numbers: "No newer control unit software found".
ME 9.7
Model series: 207
Control unit programming for hardware object numbers 0034467740 and 0034467040 reports: "The control units already contain the latest control
unit software versions."
ICM
Model series: 207, 212
Control unit programming for various hardware object numbers reports: "The following control unit software versions are available for control unit
programming: ..." After control unit programming, the control unit cannot be started up.
DTR
Model series: 212, 251
Control unit programming for software object number 2124420556 reports: "The control units already contain the latest control unit software
versions."
ME 2.7.2
Model series: 221
The control unit programming reports for various hardware object numbers: "No newer control unit software found".
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 312
AB
Model series: 164, 251
The control unit programming reports for various hardware object numbers: "No newer control unit software found".
DCU-RF
Model series: 216
Control unit programming for hardware object number 2219011200 reports: "No newer control unit software found".
DCU-LF
Model series: 221
The control unit programming reports for various hardware object numbers: "No newer control unit software found".
EGSHDKG
Model series: 197
SCN coding of N15/13 transmission control unit not possible.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2010-01-25-1354 for passenger cars:
This add-on can be installed over DAS/XD version 01/2010.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 313
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 314
Control unit/fault code
No comments:
Post a Comment