Tuesday, April 16, 2019

Disclaimer2010 Land Rover LR2 (LF) L6-3.2L Technical Service Bulletin # TECLTB00117 Date: 080320

Disclaimer2010 Land Rover LR2 (LF) L6-3.2L Technical Service Bulletin # TECLTB00117 Date: 080320



Body - Roof Opening Panel Misaligned/Jammed



No.: LTB00117



Issue: 1



Date: 20 Mar 2008



SECTION: 501



Roof Opening Panel Misaligned / Jammed - Repair Procedure



AFFECTED VEHICLE RANGE:



LR2 (LF) VIN: 8H000212 - Onwards



Model Year: 2008 - Onwards



CONDITION SUMMARY:



Situation:



The roof opening panel may be misaligned or jammed. This could be caused by the roof opening panel guide(s) being broken.



Action:



In the event of a customer concern of the above issue, install new roof opening panel guides by following the Repair Procedure outlined below.



PARTS



TOOLS:



No special tools required



WARRANTY



REPAIR PROCEDURE



REMOVING ROOF OPENING PANEL GUIDES



NOTE:



Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > LF - LR2 > Service Information > Model Year >



Workshop Manuals: 5: Body and Paint > 501-17 Roof Opening Panel: Removal and Installation



2010 Land Rover LR2 (LF) L6-3.2L Page 52



1. Refer to Workshop Manual (GTR) section 501-17 and remove the roof opening panel glass for access only (steps 1-5).



CAUTION:



Take care while removing the roof opening panel guides as damage to the glass panel guides can occur.



2. Using a suitable tool, slide the roof opening panel guide rearwards until the front of the guide is released. (Figure 1)



3. Rotate the guide. (Figure 2)



4. Remove the guide. (Figure 3)



5. Repeat steps 1 - 4 on the remaining 3 guides.



INSTALL NEW ROOF OPENING PANEL GUIDES



NOTE:



Verify 'Left' and 'Right' guide before installing into the guide rail.



2010 Land Rover LR2 (LF) L6-3.2L Page 53



1. Position the rear of the guide into the guide rail. (Figure 4)



2. Rotate the front of the guide into the guide rail. (Figure 5)



3. Using a suitable tool, slide the guide forward. (Figure 6)



4. Verify the guide is fully located against the guide rail. (Figure 7)



5. Repeat steps 1 - 4 on the remaining 3 guides.



6. Refer to Workshop Manual (GTR) section 501-17 to install the roof opening panel glass.



7. Verify roof opening panel operation.



2010 Land Rover LR2 (LF) L6-3.2L Page 54

No comments:

Post a Comment