2020 Mercedes Benz Truck ML 350 Technical Service Bulletin # LI58-40_P-049119 Date: 100305
Computers/Controls - DAS/XD Add-On 2009-12-11-1331
DAS/XD add-on 2009-12-11-1331 for passenger cars
Topic number LI58.40-P-049119
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 03-05-2010
Validity DVD version 11/2009
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 302
Reason for change
Reason for block
Complaint:
Rear entertainment unit (rear audio/video unit, left and right displays in rear)
Model series: X204, 212
The rear entertainment unit is sometimes not programmable. A fault message is displayed during control unit programming.
IC
Model series: 204, 212
Message in instrument cluster "Reprogramming not correct" after control unit programming.
Audio/COMAND
Model series: 212
COMAND - USA: SCN coding does not work when no hard disk is installed.
IC
Model series: 169, 245
During manual initial startup the service memory is not written correctly. HRA - Model series: 204 Control unit programming for hardware object
number 2048700426 reports: "No newer control unit software found".
CGW
Model series: 212
Control unit programming for hardware object number 2125451001 reports: "The following control unit software versions are available for control
unit programming: 2124421100,2124420700" After control unit programming, the control unit cannot be started up.
ETC
Model series: 211, 221
Control unit programming for hardware object number 0034464110 reports: "No newer control unit software found".
LRH
Model series: 212
Control unit programming for software 2129027502 reports: "The following control unit software versions are available for control unit
programming: 2519020900" After control unit programming, the control unit cannot be started up.
IC
Model series: 164, 251 Control unit programming for software object number 2514421721 reports: "No newer control unit software found".
Model series: 204, 212
Control unit programming for software object number 2129024302 reports: "No newer control unit software found".
DCU-LF
Model series: 221
Control unit programming for several hardware object number reports: "The following control unit software versions are available for control unit
programming ...." After control unit programming, the control unit cannot be started up.
AB
Model series: 164, 251
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 303
Control unit programming for several hardware object number reports: "The following control unit software versions are available for control unit
programming ...." After control unit programming, the control unit cannot be started up.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-12-11-1331 for passenger cars:
This add-on can be installed over DAS/XD version 11/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2020 Mercedes Benz Truck ML 350 4MATIC (164.186) V6-3.5L (272.967) Page 304
Control unit/fault code
No comments:
Post a Comment