Emissions - EVAP System DTC Diagnosis Supplement

Disclaimer2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 09-020E Date: 130404

Emissions - EVAP System DTC Diagnosis Supplement

Classification:

EC09-001e

Reference:

NTB09-020e

Date:

April 14, 2013

EVAP LEAK DTC DIAGNOSIS

This bulletin has been amended to the APPLIED VEHICLES section. Please discard all previous versions of this bulletin.

APPLIED VEHICLES:

2007 - 2014 Nissan vehicles SERVICE INFORMATION

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 494

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 495

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 496

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 497

If one or more DTCs listed below related to EVAP system leaks is found stored in Self Diagnosis, use the REPAIR FLOW CHART. Use the EVAP

system diagram for reference.

^ DTCs: P0442, P0455, and P0456

^ This Service Procedure can be used in addition to the procedure(s) outlined in the applicable Service Manual, and other bulletins applicable

to specific EVAP leak DTCs when necessary.

^ If a "Smoke (Leak Detection) Machine is available and preferred, the REPAIR FLOW CHART can still be used. This tool would be used in

place of watching for pressure drop and spraying with soapy water. Refer to the Machine's Operator's Manual for proper use.

CAUTION:

Use Essential Tool J-42909 (sent out to dealers September 1997) or equivalent to pressurize the EVAP system. Do Mot pressurize over the

amount specified in the applicable Service Manual. Do NOT use shop air pressure.

IMPORTANT NOTE:

If an EVAP system DTC(s) not related to EVAP leaks is/are found stored in Self Diagnosis, this bulletin does not apply. Refer to ASIST and

the appropriate Service Manual for diagnostic procedure(s) as needed.

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 498

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 499