Recall PC046 - Front Side Member Welds

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Technical Service Bulletin # 10-064 Date: 100513

Recall PC046 - Front Side Member Welds

Reference: NTB10-064

Date: May 13, 2010

VOLUNTARY SAFETY RECALL CAMPAIGN 2010 ALTIMA SEDAN FRONT SIDE MEMBER WELD

CAMPAIGN ID #: PC046

NHTSA #: 10V-193

APPLIED VEHICLES: 2010 Altima Sedan (L32) - Coupe and Hybrid not included

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

Nissan is conducting a Voluntary Safety Recall Campaign on certain select model year 2010 Nissan Altima Sedans. A small number of vehicles may

have welds on the front side member that are out of specification. To address this, Nissan will inspect, and if necessary, repair the front side member

welds at no charge for parts or labor.

NUMBER OF VEHICLES POTENTIALLY AFFECTED

Approximately 48 vehicles are affected by this campaign.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC046 to this campaign. This number must appear on all communications and documentation of any

nature dealing with this campaign.

DEALER RESPONSIBILITY

It is the dealer's responsibility to check Service Comm for the campaign status on each vehicle falling within the range of this voluntary safety recall

which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners

and vehicles in a dealer's inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be

corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies

only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 420

VEHICLE HANDLING FLOWCHART

Use Service Comm (campaign ID PC046) to confirm the vehicle you're working on is affected by this campaign.

Email with the following information:

Email subject line: PC046 - 2010 Altima Sedan Front Side Member Weld

Service manager name:

Dealer contact phone number:

Dealer Code:

Dealer name:

Customer name:

VIN:

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 421

CLAIMS INFORMATION

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 422