2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 10-077A Date: 110921
ABS/TCS - ABS Self-Check Noise Information
Classification: BR10-004A
Reference; NTB10-077A
Date: September 21, 2011
ABS SELF CHECK NOISE
This bulletin has been amended to include vehicles with 30 MPH Self-Check logic. Discard previous bulletin.
APPLIED VEHICLES: All Nissan Vehicles with ABS or ABS/VDC
SERVICE INFORMATION
If you identify:
^ Clicking, knocking, clunking, buzzing, or thumping noise coming from the engine compartment area.
And:
^ The noise occurs only once per ignition cycle (ignition OFF> ON) and does not occur again until the ignition is cycled.
And:
^ The noise happens briefly for only a few seconds on acceleration, between 5 and 30 MPH; depending on vehicle model and year.
The above condition is normal, may be louder if the vehicle has not been operated for a prolonged period of time, and does not need repair.
Each time the ignition is turned on and the vehicle reaches approximately 5 to 30 MPH, the ABS/VDC system performs a "Self-Check" to confirm
components of the ABS/VDC system are operating correctly.
This Self-Check function creates the noise described above.
If the brakes are being applied when the Self-Check occurs, a vibration may be felt in the brake pedal and an increased level of noise may be noticed.
NOTE:
^ See chart above for vehicles with 30 MPH Self-Check logic. Those not on charts will Self-Check at between approximately 5-20 MPH.
^ Some drive patterns may not reach Self-Test speed on first acceleration.
^ Refer customers to the Owners Manual, Section 5, Starting and driving, Brake system on the Anti-Lock Braking System (ABS). The "Self-Test"
feature section provides additional explanation.
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 200
No comments:
Post a Comment