Interior - Jerky/Bumpy Power Seat Operation
TECHNICAL
Bulletin No.: 07-08-50-016C
Date: March 02, 2010
Subject: Power Seat Feels Bumpy or Jerky When Moved Fore or Aft (Replace Lower Seat Track Assembly)
Models:
2008-2010 Buick Enclave
2007-2010 GMC Acadia
2019 GMC Truck Acadia AWD V6-3.6L Page 246
2007-2010 Saturn OUTLOOK
All Built Prior to September 1, 2009
Supercede:
This bulletin is being revised to add the 2010 model year as well as to update the parts and warranty information. Please discard Corporate Bulletin
Number 07-08-50-016B (Section 08 - Body and Accessories).
Condition
Some customers may comment that when moving the driver's seat fore or aft, the seat moves in a bumpy or jerky manner. Replace only the driver's
seat track if the concern is not for both seats. The passenger seat may also be experiencing the same concern. Replace the passenger side component
only if it is a customer concern.
Cause
The seat track bearings ride on the bearing races, which may have not properly mated. The bearings may take a set when the seat is stationary.
Correction
The lower seat track assembly service part has been released to correct this condition. Install the updated lower seat track assembly. Refer to the
Driver or Passenger Seat Adjuster Track Replacement procedure in SI.
Parts information
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer
Mercedes Benz Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.Mercedes,Mercedes,Benz,Mercedes-Benz UK,A,Class,B,Class,C,Class,E,Class,CLA,CLS,G,Class,GLA,A
Saturday, February 2, 2019
2019 GMC Truck Acadia AWD V6-3.6L Technical Service Bulletin # 07-08-50-016C Date: 100302
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment