2017 Mercedes Benz S 63 AMG Technical Service Bulletin # LI58-40_P-048586 Date: 091203

Computer/Controls - DAS/XD Add-On 2009-11-17-1313
DAS/XD add-on 2009-11-17-1313 for passenger cars
Topic number LI58.40-P-048586
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 12-03-2009
Validity DVD version 11/2009
Reason for change
Reason for block
Complaint:
Front SAM
Model series: 164, 251
Control unit programming for software object numbers 1644421700 and 1644423300 reports: "No newer control unit software found".
ABR
Model series: 221
Control unit programming for software object number 2219021301 reports: "No newer control unit software found".
CDI6
Model series: 212
Control unit programming for various software object numbers reports: "No newer control unit software found".
ICM
Page 254
Model series: 212
Control unit programming for various hardware object numbers reports: "No newer control unit software found".
ESP
Model series: 207
Control unit programming for software object numbers 212 442 19 53 and 212 902 04 00 reports: "No newer control unit software found".
MCP-B
Model series: 164
Control unit programming for hardware object numbers 1644460502 and 1644460602 reports: "The following control unit software versions are
available for control unit programming ...." After control unit programming, the control unit cannot be started up.
TGW
Model series: 204
Control unit programming for hardware object numbers 204 870 15 89, 204 870 17 90, 204 870 70 89 and 204 870 79 90 reports: "The following
control unit software versions are available for control unit programming: 204 902 15 01 and 204 902 30 01" After control unit programming, the
control unit cannot be started up.
ME
Model series: 204,207,212
Control unit programming for software object number 0094487540 reports: "The following control unit software versions are available for control
unit programming: ..." After control unit programming, the control unit cannot be started up.
Driver-side SAM
Model series: 212
Control unit programming for hardware object number 2129011400 reports: "No newer control unit software found".
Audio or COMAND
Model series: 216,221 Control unit programming for software object number 221 902 41 00 reports: "The following control unit software versions
are available for control unit programming: 221 902 67 01" After control unit programming, the control unit cannot be started up.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-11-17-1313 for passenger cars:
This add-on can be installed over DAS/XD version 11/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
Page 255
Page 256
Control unit/fault code
Validity