Campaign - Night View Assist Software Update
FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER
Campaign No. 2009080004, September 2009
TO: ALL MERCEDES-BENZ CENTERS
SUBJECT:
Models 216, 221, Model Year 2010
Update Software for Night View Assist
This Service Campaign has been initiated because Daimler AG (DAG) has determined that the software for the Night View Assist may not meet
current production specifications. As a result temporary interruptions of the picture of the Night View Assist system may occur. Dealers will update
the software for the Night View Assist at the next workshop visit.
Page 146
Prior to performing this Service Campaign:
^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.
Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.
Approximately 27 vehicles are affected.
Procedure
Note:
^ Use DAS/Xentry 07/09 with all associated patches or higher.
^ Follow the steps exactly as described in DAS/Xentry.
^ Connect battery charger (battery voltage >12.5V).
- Connect Star Diagnosis to vehicle.
- Install Night View Assist software:
Follow DAS path: Control units/Information and communication/NSA - Night View Assist (Vehicle dynamics CAN bus)/Control unit
adaptations/Control module programming.
Note:
The following allowable labor operation should be used when submitting a warranty claim for this repair:
Warranty Information
No comments:
Post a Comment