Date: April
Order No.: S-SI-58.20/111
Supersedes:
Group: 58
SUBJECT:
A. STORAGE AND MOUNTING SYSTEMS FOR MB SPECIAL TOOLS
B. MANAGEMENT SYSTEMS FOR MB SPECIAL TOOLS
MBUSA has approved the tool storage, mounting and management system for MB Special Tools developed by the Kuss Corporation.
This system is modular and allows the MB Retailer the flexibility to store/mount the required A & B Special Tools in a variety of configurations.
Additionally, a tool management system is presented, that allows visually inventory control and tool location monitoring.
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 77
Parts Information
Parts Information
Description
Additional Components Available for Expansion or as Options and Replacement are listed.
A. Storage and Mounting Systems For MB Special Tools
The heart of this tool storage and mounting system is the metal tool board which can be wall mounted, mounted to free-standing stationary steel
racks and be mobile when mounted on wheeled steel racks.
Metal Tool Board
The patented tool board is a 2.0 mm (0.05") thick steel panel measuring 1000 mm X 1050 mm (39.4 X 41.3 inches) in size. The panels are punched
with a repetitive key-hole pattern which serves as attachment points for a variety of tool holding elements. Each panel is epoxy-coated (MB grey)
(Figure 1).
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 78
Figure 1
Metal Tool Board shown
Note:
Size of Metal Tool Board is shown in centimeters, thus:
100cm 1000 mm
105cm = 1050 mm
Board Mounting clips
Two types of mounting clips are available depending on the final mounting configuration selected: wall mounting or rack mounting.
Tool Holders
A variety of sixteen special tool holders (e.g. hooks, clamps, baskets) are available to accommodate the attachment of all varieties of MB Special
Tools.
Special self-locking nuts are provided to allow fastening of all available tool holders from the face of the tool board (requiring no access from the
backside). This fastening method assures no damage to the coated surface of the board.
Metal Racks
Different metal frames are available which can be assembled to configure a wide variety of rack shapes and tool storage possibilities.
Configuration Possibilities
There are 7 different tool storage configurations offered, using the different metal frame elements.
1. Wall mount (without frame).
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 79
Figure 2
Effective version to be used only on load bearing walls. Figure 2, Complete set = 451171
Figure 3
2. Wall Mount (frame-on-wall with supports). For non-load bearing walls (Figure 3).
Frame only = 501102
Complete = 501152
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 80
Figure 4
3. Square Cabinet (Tower with Door, interior space utilized). Uses a space frame with 8 externally and 2 internally mounted tool boards. Note
that interior boards are for electrical test cable storage. Additionally, 2 shelves are delivered and are used as a top cover and interior floor
(Figure 4). Security door locking hardware is offered optionally.
Frame only 501107
Complete 501157
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 81
Figure 5
4. Square tower (no door, interior space not utilized). Uses space frame with 8 externally mounted too boards (Figure 5).
Frame only 501108
Complete 501158
Note:
Can be expanded to configuration 501157 (Figure 4) with optional hardware package set.
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 82
Figure 6
5. Triangle Tower (no Door, Interior space not utilized). Uses space frame with 6 externally mounted tool boards (Figure 6).
Frame only 501109
Complete 501159
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 83
Figure 7
6. A-frame, Short space frame on 360 degree swivel casters supporting 2 tool boards and 1 shelf (Figure 7).
Frame only = 501110
Complete = 501160
Mercedes Benz C 43 AMG (202.033) V8-4.3L (113.944) Page 84
Figure 8
7. A-Frame, Tall space frame on 360 degree swivel casters supporting 2 tool boards and 2 shelves (Figure 8).
Frame only = 501111
Complete = 501161
B. Management System For MB Special Tools
The heart of this MBUSA Tool Management System is an adhesive backed, plastic overlay (foil) that shows the tool silhouette. This provides for the
location and/or identification of the tools, thereby providing the workshop a visual tool inventory system.
The majority of hard-tools are shown on a scale of 1:1, while test cables are on a scale of 1:2.
A legend is provided listing all currently applicable A & B tools and their precise location within this tool board system. Additionally, the legend
also identifies the specific tool holder needed to mount/hold tools where applicable.
Updates to the overlays and the legend for new model year tools will be made available for ordering shortly after the tool release to retailers is
complete. This will assure the workshop can always remain current with the MB USA Special Tool inventory of A & B tools.
General Notes:
Generally, all tool boards are easily transferable from frame-to-frame and configuration-to-configuration. This is possible due to the special
mounting clips that are fastened to the backside of the tool board, and hook into slots of the space frame.
Ordering Information:
Complete Storage and Mounting systems and the Management System can be ordered via the MBUSA Standard Service Equipment Program via the
No comments:
Post a Comment