2017 Audi A3 (8PA) L4-2.0L Turbo (CBFA)Technical Service Bulletin # 301214 Date: 120806

ASMT- Shudder On First Acceleration, Gear Display ON, DTC P2711
34 DSG Transmission gear display illuminated and fault code P2711 stored in TCM with no other faults
30 12 14
2029069/2
August 6, 2012.
Supersedes Technical Service Bulletin Group 30 number 12 - 12 dated March 22, 2012 for reasons listed below.
Affected Vehicles
Condition
Customer states the gear display illuminated in cluster. Vehicle may exhibit a shudder condition on first acceleration from a stop.
The following fault entry must be logged:
^ 19143 P2711 004 Unexpected Mechanical Gear Disengagement.
Tip: This TSB only applies if entry 19143 P2711 004 is logged and the vehicle has over 18,500 miles on the odometer. If there are other complaints,
this TSB does not apply.
2010 Audi A3 (8PA) L4-2.0L Turbo (CBFA) Page 12
Technical Background
TCM recognizes drag torque on the clutch is too high.
Production Solution
Improved clutch plates from gearbox production date: March 2010
Service
Remove the transmission and replace the multiple-clutch according to the repair manual.
Warranty
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.