2005 Mercedes Benz CLK 320 Technical Service Bulletin # S-15_30-68 Date: 080818

Starting System - Tip Start Cycle Ends Prior to Start-Up
2000 Mercedes Benz CLK 320 (208.365) V6-3.2L (112.940) Page 339
Date: August 18, 2008
Order No.: S-B-15.30/68
Supersedes: MB-Net No. 113 dated March 8, 2000
Group: 15
SUBJECT
Tip Start Cycle Ending Prior to Engine Starting
If you receive customer reports in the above model vehicles of the tip start cycle ending prior to the engine starting, this may be due to the
tachometer momentarily jumping above 2000 rpm causing the starting procedure to be aborted before the engine starts. To resolve, perform the
below steps.

1. Remove starter per WIS instructions below.


2. Lightly coat teeth of starter ring gear with paste, A000 989 76 51.

Note:
Only use the paste specified. Do not apply too much paste as it can cause interference with the signal picked up by position sensor L5.
3. Reinstall starter
2000 Mercedes Benz CLK 320 (208.365) V6-3.2L (112.940) Page 340
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on August 18, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.