Attachment General Procedure2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Technical Service Bulletin # 11-054 Date: 110526
Wheels/Tires - Hunter GSP9700(R) Set Up Information
Classification: WT11-006
Reference: NTB11-054
Date: May 26, 2011
NISSAN RECOMMENDED SETUP INFORMATION FOR HUNTER GSP9700
APPLIED VEHICLES: All Nissan
SERVICE INFORMATION
The most common cause of vehicle vibration at highway speeds is tire/wheel assembly non-uniformity. There are three primary contributors that
affect tire/wheel assembly uniformity:
^ Imbalance
^ Radial run-out
^ Tire Road Force Variation (RFV).
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 267
The Hunter GSP9700 has the capability to measure tire Road Force Variation (RFV). When measuring RFV it is important to look at both the RH1
and RH2 values.
Use the instructions below to set your Hunter GSP9700 to the Nissan recommended setting for optimum performance with Nissan wheel/tire
assemblies:
INSTRUCTIONS FOR ENTERING NISSAN RECOMMENDED SETTINGS INTO THE HUNTER GSP9700
Information
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 268
Enter Setup
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 269
Enable SmartWeight Only Balance Mode and ChangeWeightSaver Residual Goal
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 270
Enable Prompted Centering Checks
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 271
Set Road Force to Display Kilograms
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 272
Disable QuickMatch Setting
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 273
Set Weight Units to Display Grams
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 274
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 275
Set Runout & RoadForce Limits and Limits Multiplier for LT Tires and P/SUV Tires
No comments:
Post a Comment