^ Instrument Cluster display with automatically centering text display - INSTALLEDMercedes Benz C 43 AMG Technical Service Bulletin # P-18_00-20 Date:

^ Instrument Cluster display with automatically centering text display - INSTALLEDMercedes Benz C 43 AMG Technical Service Bulletin # P-18_00-20 Date:

031205

Engine - Oil Sludging Damage/Class Action Settlement

Date: December 5, 2003

Order No.: P-B-18.00/20

88

Supersedes:

Group: 18

SUBJECT:

All Models with FSS or FSS+ Starting Model Year 1998

Inspection, Diagnosis and Repairs Of Engine Performance Complaints Due to

Excessive Oil Consumption and/or Oil Sludging

Note:

In case of any complaints relating to oil sludging and sludging caused engine damage complaints relating to model year 1998 through model year

2001 (Sold through March 2001). Please also review and comply with O'Keefe Class Action Settlement and Service Guidelines Document

available on May 9, 2003.

Note:

These guidelines must be strictly followed or warranty claims will be debited back to the dealer.

In case of engine performance complaints relating to excessive oil consumption and/or oil sludging, the vehicle must be inspected to verify the

complaints and diagnosis must be performed in the following order.

1. The FSS history should be accessed via SDS. The FSS history read out should be used to confirm the maintenance history of the vehicle. If the

FSS history read out shows that the vehicle was improperly maintained, i.e., the maintenance intervals were materially overdrawn; and in

addition, if the review of all the customer's service records indicate that at the time of the subject oil change, engine oils not approved at the

time the change was made were used, the vehicle is not covered by the Mercedes-Benz Limited Warranty. Additionally, the O'Keefe Class

Action Settlement Service Commitment applies only where the oil used was one that was approved at the time of the oil change. Further,

please note that under the O'Keefe settlement (1) there will be no coverage where there is evidence of vehicle abuse or neglect in failing to

properly maintain the vehicle according to MBUSA's recommendations including the recommended service schedule; and (2) coverage shall

not apply to vehicle's with other product alterations that would void warranty coverage on the vehicle. It should be further noted however that

in addressing these issues with consumers that the O'Keefe settlement provides that if there is a legitimate dispute as to whether oil sludging or

related engine damage was caused by the use of conventional motor oil during the times when it was recommended, MBUSA and thus, its

authorized dealers, will err on the side of the customer class member in determining whether to provide coverage.

At this point, inspection and diagnosis of the vehicle are complete; do not proceed to Step 2. Advise the owner of the vehicle that the cost of

repair will be at the owner's expense since the engine performance complaint is due to maintenance neglect.

Note:

For vehicles subject to O'Keefe Class Action, see accompanying service guidelines document for additional steps, including contacting MBUSA

Market Team.

Note:

Prior to March 1, 2001,only engine oils with at least SH and/or SJ API classification were approved for use. Starting March 1, 2001, only engine

oils with MB229.1 or MB229.3 certification were approved for use. Starting model year 2003, only engine oils with at least MB229.3

certification were approved for use.

For future model years, refer to the latest version of Factory Approved Service Products, Order No. GS-0473.

If the FSS history read out indicates that the vehicle was properly maintained or if otherwise authorized by MBUSA pursuant to O'Keefe Class

Action Settlement, proceed to Step 2.

2. Perform an oil consumption test. Reference WIS Doc. AR18.00-P-0025AV (using service calibrated dipstick) or 0025CB (using SDS)

Note:

One (1) oil consumption test is sufficient to verify if an engine has excessive oil consumption condition; and pursuant to the O'Keefe Class

Action Settlement, MB will pay for one oil consumption test. Oil losses due to external leaks such as porous crankcase, porous cylinder heads,

oil leakage through gaskets, seals, or 0-rings are not considered oil consumption. As indicated in WIS Doc. AR18.00-P-0025AV or 0025 CB,

you must perform repairs on these external leaks as outlined as the first step in any engine oil consumption test process as a normal repair; and

for vehicles out of warranty this cost of repair is at the owner's expense.

If oil consumption is not excessive (

subsequent updates. If oil sludging is found, take corrective measures as identified in S-B-18.00/16a and any subsequent updates. If this corrects

the condition, repair is complete; do not proceed to step 3.

Note:

Severe oil sludging, sticking piston rings, and scored cylinder walls will result in excessive oil consumption.

If oil consumption is excessive (= or > than one quart/660 miles), check for oil sludging and/or oil sludging related engine damage. Reference

S-B-18.00/16a and any subsequent updates.

89

If oil sludging is found, perform tests and/or inspections as outlined in Steps 3 and 4 below to check for sticking piston rings or cylinder bore

damage, respectively. If any or all of the above damages related to oil sludging are found, perform their respective remedies in Steps 3 and 4.

Remedy the oil sludging by taking corrective measures as identified in S-B-18.00/16a and any subsequent updates. If these correct all these

conditions, repairs are complete.

If an engine has excessive oil consumption and only oil sludging is found, take corrective measures as identified in S-B-18.00/16a and any

subsequent updates.

Note:

If an engine is replaced, solely due to excessive oil consumption and/or oil sludging, instead of the performance of the corrective measures as

identified in S-B-18.00/16a and any subsequent updates, the engine will be debited back to the dealer.

3a. If an engine has excessive oil consumption and/or oil sludging as confirmed by the above two steps and, in addition, sticking piston rings are

found to have been caused by oil sludging, as verified by performing a cylinder compression test per WIS Doc. # BE01.00-Z-9999AZ;

remove, install and replace piston rings, refer to WIS Doc. # AR03.10-P-7311BV.

3b. Check for evidence of increased levels of dirt/dust entering through the vehicle's air intake system. Reference DTB P-B-07.65/31. If the engine

shows no such dirt/dust intake and cylinder walls are not scored as confirmed by performing test and inspection in step 4; remove, replace and

install piston rings as per WIS Doc. No. AR03.10-P-7311BV. If this corrects the condition, repair is complete.

Note:

Engine damage arising from dirt/dust entering through the vehicle's intake system is not covered by the O'Keefe Class Action Service

Commitment. It is also not covered by the warranty unless the entry of dust/dirt resulted from some warrantable defect in the product.

4. If cylinder walls are found scored as verified by performing a cylinder compression test per WIS Doc. BE01.00-Z-9999AZ and further

confirmed by borescope inspection, refer to various WIS document in group number 01.10; replace crankcase with long block. If long block is

not available, replace with complete engine.

Note:

Engine damage arising from dirt/dust entering through the vehicle's intake system is not covered by the O'Keefe Class Action Service

Commitment. It is also not covered by the warranty unless the entry of dust/dirt resulted from some warrantable defect in the product.

Note:

Any return long block or complete engine whose cylinder walls and it's components are found to be within specification will be debited back to