Monday, January 7, 2019

Campaign - Check Coolant Hose And Replace If Necessary

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 170410 Date: 101001



Campaign - Check Coolant Hose And Replace If Necessary



SI B17 04 10



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 380



Cooling Systems



October 2010



Technical Service



PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY



ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS OR PRIOR TO DELIVERY.



SUBJECT



Service Action: Check Coolant Hose and Replace if Necessary



MODEL



E89, E90, E92 and E93 vehicles produced from 07/23/2010 to 07/30/2010



SITUATION



The vent hole of the coolant hose coupling, located on the driver's side of the radiator, may be blocked.



This blockage will prevent the cooling circuit from venting properly into the expansion tank.



AFFECTED VEHICLES



This Service Action involves E89, E90, E92 and E93 vehicles which were produced from 07/23/2010 to 07/30/2010.



In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar



label for code number 576. If code number 576 has been punched out, the campaign has already been performed. If code number 576 has not been



punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the



response of the system, either proceed with the corrective action or take no further action.



CORRECTION



Check the date code on the coolant hose coupling and replace the hose if necessary.



PROCEDURE



Blocked couplings were manufactured on 7/15/2010. Check the date code on the coupling (stamped on the left side of the coupling when looking



down at the hose from the front of the vehicle) and if the date code is 100715, replace the coolant hose. Refer to Repair Instruction RA 17 00 005 for



replacing the coolant hose.



PARTS INFORMATION



LABEL INSTRUCTIONS



This Service Action has been assigned code number 576. After the vehicle has been checked and/or corrected, obtain a label (SD 92-???) and:



A. Emboss your BMW center warranty number in the middle of the label (1);



B. Punch out code number 576 (2), printed on the label; and



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 381



C. Affix the label to the B-pillar as shown.



If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on



top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.

No comments:

Post a Comment