2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00143 Date: 080515
Engine - Revised R&R Procedure (Partial Procedure)
No.: LTB00143
Issue: 1
Date: 15 May 2008
SECTION: 303
Revised Workshop Procedure - Engine Removal / Installation
AFFECTED VEHICLE RANGE:
Range Rover Sport (LS) VIN: 6A900129 - Onwards
Model Year: 2006 - Onwards
CONDITION SUMMARY:
Situation:
The Service Repair Operation (SRO) times and Workshop Manual procedure for the removal / installation of both the Normally Aspirated and
Supercharged engine assemblies has been revised. The procedure has changed by eliminating the need to remove the right-hand driveshaft and
radiator from the vehicle.
Action:
When removing / installing the engine assembly, follow the Repair Procedure outlined below.
PARTS:
No parts necessary
2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 241
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
REMOVE /INSTALL ENGINE ASSEMBLY
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > LS - Range Rover Sport > Service Information >
Model Year > Workshop Manuals > 3: Powertrain > 303: Engine
1. Refer to Workshop Manual (GTR) Section 303 - 01A: Engine - 4.2L or Section 303 - 01B: Engine - 4.4L for the revised removal / installation
No comments:
Post a Comment