Computer/Controls - Break Out Box Overlay Identification

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 124706 Date: 100701

Computer/Controls - Break Out Box Overlay Identification

SI B 12 47 06

Engine Electrical Systems

July 2010

Technical Service

This Service Information bulletin supersedes SI B12 47 06 dated November 2006.

[NEW] designates changes to this revision

SUBJECT

Break Out Box Overlay Identification

MODEL

E60 (5 Series) 525i, 530i with N52 and N52KP engine

E60 (5 Series) M5

E63 and E64 (6 Series) M6 Coupe and Convertible

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 364

E70 X5 3.0 with N52 KP

E83 X3 3.0 with N52 KP

E85 Z4 2.5 and 3.0 with N52KP engine

E90, E91 and E92 (3 Series) All models

INFORMATION

[NEW] The three illustrations below will identify the seven sub connectors within the two DME main connectors. Using Illustration #1 will

determine the proper location of the sub connectors within the main connectors. Illustrations # 2 or # 3 (depending on the model) will identify the

sub connector locations on BMW Special Tool 61 2 420/422.

Special Tool 61 2 420/422, Break Out Box overlays, are used in conjunction with adaptor cable 12 7 420/421, 612 420/421 and break out box 61 4

380/381. These special tools are utilized on all vehicles equipped with the following DME variants and the models described above:

^ MSS65

^ MSV70

^ MSD80

^ MSV80

^ MSD81

^ [NEW] MSS60 (E9x M3)

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 365

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 366