Disclaimer 2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 611207 Date: 091002
Antitheft - No Engine Crank After CAS3 Replacement
SI B 61 12 07
General Electrical Systems
October 2009
Technical Service
2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 253
This Service Information bulletin supersedes SI B61 12 07 dated October 2009.
[NEW] designates changes to this revision
SUBJECT
No Crank After CAS3 Replacement
MODEL
E90, E91, E92, E93 (3 Series) vehicles produced from 6/2006
E70 (X5) [NEW] vehicles produced from 9/2006
E71 (X6)
E82, E88 (1 Series)
E60, E61 (5 Series) vehicles produced from [NEW] 9/2006
E63, E64 (6 Series) vehicles produced from [NEW] 9/2006
SITUATION
After replacing the CAS3 (Car Access System), the vehicle has a "No crank" condition.
CAUSE
The CAS "Line mode" is still active.
PROCEDURE
Use ISTA to delete the "Line Mode". Select "Activities/Service function/Drive/CAS/Reset starter interlock", and then run the test plan
S6100_KL50MONT.
[NEW]Note that for certain vehicles up to 3/2007, the test plan may not be available. Identify the vehicle manually by selecting "Basic features" and
select a production date after 3/2007 (e.g., input a 6/2007 production date). The test plan will then be available.
No comments:
Post a Comment