2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
Vehicle: All Technical Service Bulletins
A/T - Operating Fluid Specification Changes
Date December 21, 2011
Order No: S-B-00.40/89c
Supersedes S-B-00.40/89b September 1, 2011
Group: 00
Revision C: Added exception note.
SUBJECT: MY - All, Models All with Transmission 722.6 or 722.9
Operating Fluid Specification Changes for Automatic Transmission
5-speed automatic transmission 722.6
Only use the transmission oils outlined in specification for operating fluids sheet 236.14.
See WIS document: BB.00.40-p-0236-14a.
MB part number - A001 989 68 03 10
7-speed automatic transmission 722.9 up to transmission production date June 21, 2010
Only use the transmission oils outlined in specification sheet 236.14
See WIS document: BB.00.40-p-0236-14a.
MB part number - A001 989 68 03 10
7-speed automatic transmission 722.9 after transmission production date June 21, 2010
Only use the transmission oils outlined in specification sheet 236.15
See WIS document: BB.00.40-p-0236-15.
MB part number - A001 989 78 03 09
Note:
The 2 different variants of 722.9 transmission oil are not compatible with one another and can not be mixed. The later oil can be identified by its
blue color as opposed to the former oil which is red in color.
Exception Note 1: Transmissions electrohydraulic controller units and torque converters made available through the parts department are checked at
the production plant with FE AT-134 only. This is why these parts may exhibit traces of FE ATF-134, In this case the transmission controller unit
and torque converter must not be cleaned. The transmission can be filled with the corresponding gear oil (as per this SI) immediately after it has been
installed.
Exception Note 2: Transmission 722.6, 722.9 up to transmission component serial number 2834526 may not be filled with FE~ATF 134.
Transmissions constructed after the June 21, 2010 transition can be visually identified by the following characteristics:
1. The oil pan has a noticeable change in the 4 dimples (pictured below).
2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
2. The oil pan is 5mm deeper
3. The overflow pipe (inside the oil pan) is Green rather than black or white as on the earlier construction transmissions.
Xentry DAS version 05/2010 together with add-on 1476 displays a reference to the specified gear oil before reading out the transmission oil
temperature.
This information must be observed when filling the transmission.
Mercedes-Benz, Luxury Automobiles, German Engineering, Premium Car Brand, Mercedes Innovation
Popular Posts
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
Love For Cars The 2008 model may not look too different to the previous Accord, but under the surface, it is indeed all-new. The styling isn...
-
Vehicle: All Technical Service Bulletins Diesel Engine - Crackling/Ticking Noise At Idle Engine makes intermittent knocking noise, ticking...
-
$102.25 End Date: Sunday Jul-28-2019 13:37:55 PDT Buy It Now for only: $102.25 Buy It Now | Add to watch list
-
You don't need a supercar to have cool doors. There’s far more to a supercar than something as superficial as a cool pair of doors. But,...
-
$75.97 End Date: Sunday Jul-7-2019 11:44:55 PDT Buy It Now for only: $75.97 Buy It Now | Add to watch list
-
Bendix TitaniuMetallic2 Brake Pads are completely reformulated with TitaniuMetallic2 blue coating and is more effective during...
-
P0108 B28 (Pressure sensor) : Short circuit to positive or open circuit (P0108) Possible cause: B28 (Pressure sensor) Affected functi...
-
The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DI...
-
As of the latest 2025-2026 Tesla lineup, the cheapest Tesla you can buy new is the **Tesla **Model 3 Standard trim — an entry-level versi...
Popular Posts
-
P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 A...
-
P2505 Relay 'Circuit 87' ( Engine ) (P2505) Possible cause: N3/10 (MESFI [ME] control unit) K40/4kK (Engine electronics an...
-
C426 Start enable 'Drive authorization system' not issued. Possible cause: Engine management Affected functions: ...
-
Misfiring of cylinder 4 : Damages TWC (P0304) Misfiring of cylinder 4 : Damages TWC (P0304) Possible cause: Combustion misfirings Aff...
-
Part 1 One or more messages from control unit N80 (Steering column module) are not available on the CAN bus. Possible cause: Ch...
-
2010 Mercedes Benz Truck GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) Vehicle: All Technical Service Bulletins COMAND(R) - 'Dr...
-
2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985) Vehicle: Customer Interest ABS/TCS - ABS Lamp ON/Codes 5603/5410 Set Y...
-
D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil ...
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
P0108 B28 (Pressure sensor) : Short circuit to positive or open circuit (P0108) Possible cause: B28 (Pressure sensor) Affected functi...
Popular Posts
-
P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 A...
-
D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil ...
-
Vehicle: All Technical Service Bulletins Diesel Engine - Crackling/Ticking Noise At Idle Engine makes intermittent knocking noise, ticking...
-
Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Technical Service Bulletin # LI83-30_P-05363...
-
Okay, so I need to figure out the financial results for Tesla's second quarter of 2025 based on the information provided. Let me start...
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
Part 1 One or more messages from control unit N80 (Steering column module) are not available on the CAN bus. Possible cause: Ch...