2AE0 - P1562

2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction

none

2AE0 - P1562 (DME)

2AE0 - P1562

Information saved in

DME

Fault code

2AE0 - P1562

Fault text

Idle speed control during cold start, plausibility

Fault description

Cold Start Idle Air Control System RPM Higher Than Expected (Bank 1)

Condition for fault identification

Test condition:

Idle = ON

VS = 0 km/h

High idle for catalyst heating = On Terminal condition: Engine must be running Voltage condition:

none

Condition for fault memory entry

20 sec.

Action in service

Note any other fault code entries and repair the associated problems!

Check all load-responsive servo actuators such as Valvetronic and the throttle valve for stored control module fault memory entries and malfunctions!

(check injection and induction system as indicated)

Fault effect and breakdown warning

Driver information

Warning light:

MIL on in 2nd driving cycle