2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # 09-03-10-017 Date: 091217

2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # 09-03-10-017 Date: 091217

Wheels/Tires - Replacement Wheel Weight Information

INFORMATION

Bulletin No.: 09-03-10-017

Date: December 17, 2009

Subject: Information on Replacement Wheel Weights

Models:

2010 and Prior GM Passenger Cars and Light Duty Trucks (including Saturn)

2010 and Prior HUMMER H2, H2 SUT, H3

Important

GM recommends that all dealers replace any existing inventory of lead wheel weights with approved, non-lead weights. The EPA and some

states (particularly California) are pressuring for the elimination of lead wheel weights. California dealers who continue to use lead wheel

weights after December 31, 2009 may be subject to suit under Proposition 65. If lead weights are scrapped, GM suggests they be sent to a

lead recycler for proper disposal.

Wheel Weights Available from GMSPO

GM has replaced all former styles of wheel weights with two designs of lead-free, clear-coat safe, adhesive-backed weights. The first design

replaces all "clip-on" style of weights and the second replaces all "stick-on" styles.

Important

The wheels must be cleaned prior to installation of any adhesive weights. Failure to properly clean the wheels may result in poor adhesion

of the weights.

"Clip-On" Adhesive Wheel Weight Replacements

2010 Cadillac Truck SRX FWD V6-3.0L Page 198

The "clip-on" style comes on a roll and is "cut to length". The packaging of the wheel weight has a ruler on the box to measure the proper length of

material to achieve any desired amount of weight required. It is affixed to the wheel in the same location as a traditional clip-on weight would but

utilizes an adhesive instead of the mechanical clip. The weight does not damage clear-coated surfaces.

"Stick-On" Adhesive Wheel Weight Replacements

The "stick-on" weight is 0.17 g (6 oz) in total mass, constructed of 24 individual 0.007 g (0.25 oz) weights. It is affixed to the wheel in the same

location as a traditional stick on weight positioned in the interior of the wheel. The weight is low profile and does not diminish proper caliper to

wheel clearances. You may use as much or as little of the 0.17 g (6 oz) total weight of the product as required and more product may be used if the

application calls for additional weight.