2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # 05-08-46-004C Date: 101223

2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # 05-08-46-004C Date: 101223

OnStar(R) - Number Incorrect/Incorrectly Assigned

INFORMATION

Bulletin No.: 05-08-46-004C

Date: December 23, 2010

Subject: OnStar(R) Phone Number Concerns (Phone Number Incorrect/Assigned to Another Vehicle/Phone) That Occur During Diagnosis of

OnStar(R) System

Models:

2000-2011 GM Passenger Cars and Trucks

Equipped with OnStar(R) (RPO UE1)

Supercede:

This bulletin is being revised to update model years up to 2011. Please discard Corporate Bulletin Number 05-08-46-004B (Section 08 - Body and

Accessories).

2010 Cadillac Truck SRX FWD V6-3.0L Page 152

During diagnosis of an OnStar(R) concern, the technician may be told that the OnStar(R) phone number is incorrect or tied to another vehicle

and/or phone of some kind. To resolve these concerns, the Tech 2(R) with software version 22.005 (or higher), has the capability to change the

OnStar(R) phone number.

Service Procedure

1. With the Tech 2(R), build the vehicle to specifications within the Diagnostics area of the Tech 2(R).

2. For vehicles with physical-based diagnostics - under Body, go to the OnStar(R) section. Then select the Special Functions menu.

For vehicles with functional-based diagnostics - under Body and Accessories, go to the Cellular Communication section. Select Module

Setup and then Vehicle Communication Interface Module.

3. Locate the Program Phone Number prompt and select it. The original phone number will be displayed on the Tech 2(R) screen.

4. Contact the OnStar(R) team at the GM Technical Assistance Center (TAC) to obtain a new phone number.

5. Highlight the digits of the phone number one at a time and enter the new phone number using the number keys on the Tech 2(R).

6. Press the Soft key at the base of the screen for Done once these numbers have been changed on the screen.

7. Press the Soft key for Done again. The area code or new phone number has now been programmed into the phone.

8. Cycle the ignition to Off and open the driver's door.

9. Press the blue OnStar(R) button to make sure that a normal connection can be made to the OnStar(R) call center. If applicable, make sure the

Hands-Free Calling (HFC) works properly by making a phone call.

10. If the system is working properly, fax or voicemail a case closing into the OnStar(R) team at TAC with the results. Dealers in Canada should

submit case closing information through the GM infoNET.

Please follow this diagnostic process thoroughly and complete each step. If the condition exhibited is resolved WITHOUT completing every step,

the remaining steps do not need to be performed. If the procedure above does not resolve the condition, you must contact TAC for further

assistance. This diagnostic approach was developed specifically for this condition and should not automatically be used for other vehicles with

similar symptoms.

Warranty Information (excluding Saab Models)

For vehicles repaired under warranty, use:

Warranty Information (Saab Models)

For vehicles repaired under warranty, use the table.