Body - Load Compartment Sliding Door Arrester Inoperative
Load compartment sliding door arrester inoperative
Topic number LI72.16-N-048763
Version 1
2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898) Page 54
Design group 72.16 Sliding doors
Date 02-01-2010
Validity 906.6## - 906.7##
Reason for change
Reason for block
Complaint:
When open, the load compartment sliding door does not lock in the end position.
Cause:
The position of the arrester at the bottom of the C-pillar prevents it from engaging in the lower sliding carriage of the load compartment sliding door.
The lower sliding carriage does not engage in the arrester.
2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898)
Page 55
2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898)
Page 56
Remedy:
Loosen the arrester and fit two washers at the upper threaded connection (only) between the bodywork and the arrester (see attachment). The bolts
must be tightened to a torque of 13 Nm.
Preparatory work: Remove step as described in WIS AR 72.16-D-7816A.
Do not replace any parts.
2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898)
No comments:
Post a Comment