Wednesday, November 24, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 1294

2010 Cadillac Truck SRX FWD V6-3.0L Page 1294



6T70/6T75 - Automatic Transmission



DTC P0218



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC P0218



- Transmission Fluid Overtemperature



Circuit/System Description



The primary source of heat in the transmission is the torque converter. Hot oil exits the torque converter through the torque converter clutch (TCC)



control valve and flows to the transmission cooler supply line. The supply line connects to the cooler, which is in the radiator. From the cooler, the



oil returns through the oil cooler return line and enters the lubrication circuits. After lubricating the internal components, the oil returns to the oil



pan. The transmission fluid temperature (TFT) sensor is located in the control solenoid valve assembly.



Conditions for Running the DTC



* The ignition voltage is 8.6 volts or greater.



* The TFT is -39 to +149掳C (-38 to +300掳F) for 5 seconds.



Conditions for Setting the DTC



The TFT is 140掳C (284掳F) or greater for 1 minute.



Action Taken When the DTC Sets



DTC P0218 is a Type C DTC.



Conditions for Clearing the DTC



DTC P0218 is a Type C DTC.



Diagnostic Aids



The driver information center (DIC), if equipped, will display 'TRANSMISSION HOT- Idle Engine' when the TFT reaches 132掳C (270掳F). The



TFT on the scan tool should rise steadily to a normal operating temperature, and then stabilize. Ask about the customer's driving habits, trailer



towing, etc. Trailer towing should occur in D4. Ensure the engine cooling system is functioning normally.



Reference Information



Schematic Reference



* Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)



* Park - Engine Running (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 -



Automatic Transmission/Park - Engine Running)



* Fluid Passages (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 - Automatic



Transmission/Fluid Passages)



Description and Operation



* Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/6T70/6T75 - Automatic Transmission/Transmission General Description)



* Transmission Indicators and Messages (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/6T70/6T75 - Automatic Transmission/Transmission Indicators and Messages)



DTC Type Reference



Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code



(DTC) Type Definitions)

No comments:

Post a Comment