Sunday, September 26, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 564

2010 Cadillac Truck SRX FWD V6-3.0L Page 564



DTC B2500



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptor



DTC B2500 00



- Driver Exterior Unlock Switch Circuit



Diagnostic Fault Information



Circuit/System Description



The driver window switch monitors the voltage level of the key switch unlock signal circuit. When the key is inserted into the driver door key



cylinder and turned to the Unlock position, a switch within the driver door latch closes causing the voltage to drop within the key switch unlock



signal circuit. The driver window switch will detect the drop in voltage and will send a serial data message to the BCM commanding all the doors



to unlock.



Conditions for Running the DTC



* The ignition is ON.



* The system voltage is 9-16 V.



Conditions for Setting the DTC



The BCM detects a short to ground on the driver door key switch signal circuit.



Action Taken When the DTC Sets



The BCM will ignore the unlock command from the key cylinder switch.



Conditions for Clearing the DTC



* This DTC will be current for as long as the fault is present



* When the fault is no longer present, the DTC will be a history DTC



* A history DTC will clear after 50 ignition cycles



Reference Information



Schematic Reference



Door Lock/Indicator Schematics (See: Body and Frame/Locks/Diagrams/Electrical Diagrams/Door Lock/Indicator Schematics)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Power Door Locks Description and Operation (See: Body and Frame/Locks/Power Locks/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General



Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

No comments:

Post a Comment